Comcast Remote Codes For Vizio Tv

How To Program the Silver Comcast RemoteI recently wrote a tutorial on how to program the Comcast remote that comes with the little black box that was required after Comcast upgraded their system. If that is the remote you need to program you can find the instructions for that remoteThis is the Comcast remote that typically comes with your Comcast box.This remote can be used to remote control your TV as well as your cable box. It can also be programmed for one other device for a total of three. It is designed to serve as a universal remote so that you only need one.

1. Comcast Remote Codes For Vizio Tv For Time Warner
2. Comcast Remote Codes

There are two methods to program the remote. The first is to automatically search for the correct code and the second is to manually program the remote using manufacturer’s codes. Both methods are explained below. If you are trying to set up a device on the Auxiliary channel, such as a DVD or VCR player, then press the “Aux” button instead of the “TV” button.Then press and hold the “Setup” button until the “TV” button flashes twice. Then release the “Setup” button.Enter the following digits: 991. You should see the TV button flash twice.If you are searching for a DVD or VCR code enter the digits 992 and you should see the Aux button flash twice.Press the “Power” button once. Then aim the remote and the TV and start pressing the “CH +” button at a medium pace until the TV turns off.

(Don’t press it too fast!!!) There have been times when I was in a hurry and was pressing the key too fast. What happened is that I couldn’t react in time when the TV turned off and actually hit the key a couple more times.

This ended up giving me the wrong code and I had to start all over again. So, I know it seems to take a while sometimes, but it’s better to go at a medium pace so that you get it right the first time!.Once the TV turns off, press the “Setup” button once to lock in the code. You should see the “TV” button flash twice. Manual Program Method.Turn your TV or device on.On the Comcast remote, press the “TV” key once. If you are trying to program a DVD player or other device press the “Aux” key instead.Press and hold the “Setup” key until the “TV” key (or Aux key) blinks twice and then release the “Setup” key.Find the codes for your TV.

They are listed on the back of the instructions that came with your remote. If you don’t have this list, I have posted it here on this site:The codes for Audio Amplifiers is located here:The codes for DVD Players is located here:.Once you have found the code(s) for your device write them down for the next step.If there is more than one code listed start with the first one and enter the 5-digit code. If you do this step correctly you will see the “TV” key blink twice. If you do this step incorrectly you will see the “TV” key display one long blink.

If this happens you will have to start over from Step 2.Aim the remote control and your TV and press the “Power” button once. If this is the correct code, your TV will shut off. If it doesn’t then repeat steps 2 thru 6 using the next code in line. Your silver Comcast remote should now be able to control the power, volume and channels on your TV and you can hide the remote that came with your TV. One thing to keep in mind, is that when you hit the “All On” button you have to leave the remote aimed at the TV and cable box for a few seconds in order for it to turn off each device. You will see each device button light up as the remote turns this device on or off.

For example, when you hit the “All On” button you should see the TV button light up and then the TV turn on, then you will see the Cable button light up and then the cable box turn on and so forth. I hope that you have found this information useful. If so, please feel free to leave comments.If you found this tutorial useful please give it a +1 and share it with your friends! I use the AUX button to turn my Pioneer receiver on and off.

I use an HDMI cable to get HDTV and audio to my receiver and the converter box vol-up and vol-down does not actually control the volume instead, I must control the volume using my receiver. This may be petty, but it’s a hassle to press the AUX button to control the volume then press CABLE to put the silver remote back in a state to control the comcast box.

There used to be a way to “unlock” the volume button and re-program it so that when the remote control is in CABLE mode, the volume botton actually controls another device (not the converter box). I’d like the volume button to control my receiver (Pioneer) when the remote is in CABLE mode. IS THIS POSSIBLE?. I have gleaned plenty of info for my remote from your site, and must express my gratitude for your efforts and time.I do have one issue I have been unable to resolve as of yet. The silver remote currently runs my DVD player and TV (both JVC, and the cable, of course. When I’m in cable mode and use the volume key, the TV unfortunately displays the volume bar much longer that I would like.

I try using the “Exit” button to make the volume bar go away, but the remote is in cable mode and does not respond to my bidding. If I want to make it go away, it’s either grab the original TV remote or switch the silver remote to TV mode, but by then the volume bar has usually gone away on its own. I’m wondering if it’s possible to tie the exit button to the TV while still controlling the cable box. Unfortunately, the TV itself has no settings to adjust the volume bar time or display.Any suggestions? I would really appreciate any fixes you could suggest.

I have the silver remote from comcast with the red select button. My TV is an Olevia, Model 232-S12. I tried the 3 codes suggested.

The middle one, 11230, will turn the tv off only to a grey screen but not completely off. From there it will turn it back on but it is never a black, completely off screen.

Also it does not allow me to control the volume. I also was not clear if you use only the “power” button that is in the 5 selections at top of remote, which I did, or use the AUX button. I do have a DVD box also and did not know if that had to be programed separtely to work with the TV.

Hi Dot,a) Have you tried the auto-programming method? Usually it’s better to try that first and let the remote find the appropriate code.b) To answer your first question. Yes, you will want to use the “Power” button that is among the five selections.

You should never attempt to program the “All On” button.c) If you have a DVD box, it would be best to put that on the “AUX” button.If you have any more questions, please leave another comment or use the contact page. I’d be glad to help!Oh, and thanks for the heads up about the comment screen. I’m actually doing a redesign of the site, which should be up pretty soon!. After reading all the above I’m more than certain I’ve arrived at the correct site.I have a Philips DVD model DVP3140/37, which I’m trying to program into my silver Comcast remote. With the DVD on and hitting aux then setup, getting the double blink then entering the code (I’ve tried many including the ones above) all codes give me that double blink but then nothing at all occurs when hitting the power button.

The original remote is long gone so I am really hoping you could help. Thank you in advance for your time. I have a silver comcast remote and the instructions you posted dont match the manual. Im having trouble locking in the code. Instead of blinking twice when i press the setup button to lock the code. It just makes one long flash.

Like its caneling and i dont have the code. Also you are saying press channel up and also 992 for dvd players but when i do any of those options it also cancels the search. I would very much appreciate any help you can give. I have a TruTech STS9300 dvd player i got from a goodwill with all the speakers and would like to be able to use my remote for volume. I cannot find codes anywhere. If you have some please share.Thanks alot.Chris.

Hi Chris,There are actually three different silver comcast remotes. One with a red “OK” button, one with a grey “OK” button and a darker grey/silver remote.

The one the tutorial is for, is the silver remote with the red “OK” button, which is pictured in the tutorial. If your instruction manual is not matching up, then I’m assuming you have a different remote. And I would suggest following the instruction that came with that particular remote.As for codes, try these: 10451, 11661, 10092, 10672, 10019, or 10623If those doesn’t work, try codes listed for Daewoo. I think that is that actual manufacturer of that particular brand. Also, if you do have the remote with the red “OK” button, double check your steps!!Hope you get it working! Let me know how it goes and if I can help again. Hi everyone, I have a question I searched through complaints hoping someone had the same but I did not see one.

My remote is programed for my t.v the batteries came out one day and now I cant use my input button to change over to av to us my dvd player but the volume and off/on button still works and turns. When I press the input button now the cable button light up instead of my tv button. By the way I do not have cable im just using this Comcast remote for this t.v. But one day the input stopped working do I have to reprogram it thank you so much.

I am trying to unpair my Comcast remote from my tv because since receiving a new remote and pairing it with my tv I can no longer get the volume to turn up past 63 when before it went to 100. Before getting new remote I used old Comcast remote for cable box and tv remote for tv, volume would go much louder as it is now I can barely hear some things I’m watching. Already did live chat he told me steps to take but they didn’t work. He even had me remove battery from remote, press power button 5 times, then replace battery that didn’t work then he had me unhook cable from tv that still didn’t work. Should I just go swap remotes?.

Hello.Just received a new remote control from Comcast.& am using Xfinity. Was able to connect & get it working ok. Received a phone call,& thought that I had touched the mute button which the sound did stop. After the call, I looked at the Black screen, it stated the following; ( I got the shakes, that w ds to you). Have no idea where those words came from. I shut it down,& went through the process of reconnecting, worked but still have the same message no sound, or picture. Would appreciate any help to correct.

Thanks John. Hello.Just received a new remote control from Comcast.& am using Xfinity. Was able to connect & get it working ok. Received a phone call,& thought that I had touched the mute button which the sound did stop. After the call, I looked at the Black screen, it stated the following; ( I got the shakes, that w ds to you). Have no idea where those words came from. I shut it down,& went through the process of reconnecting, worked but still have the same message no sound, or picture.

Would appreciate any help to correct. Thanks John.

All-on button problem:I have a Polaroid TV 46GSR3000. I programmed the Comcast silver remote (red button), manually, with a code. Everything works correctly (volume, channel-up/down,etc.). Also, with the TV selected the power button turns the TV on or off. The All-on button correctly turns both the TV and Comcast box off.However, the All-on button does not turn the TV back on (it does turn the Comcast box on).

Comcast Remote Codes For Vizio Tv For Time Warner

This happened first with my old Comcast remote, so I got a new remote from Comcast. The same thing still happens.Any suggestions?. Using a signal splitter, I have connected to a DCX3501 set top box, and a little DTA converter box, in order to VCR record one channel while watching another.I have a large grey remote for the DCX3501, and a small black remote for the DTA converter.I have programed both remotes with the same television code.Problem: The remotes are not working independently. Changing the channel for the DTA converter with the DTA remote, also changes the channel on the set top box, and conversly, changing the channel for the set top box with the set top remote, also changes the channel on the DTA converter box. Pressing the “power off” button on the DTA remote turns off the television, as expected, but it also turns off the set top box.How can I get the remotes to work independently?The DCX3501 replaced a no-longer-functioning DCT2000. When the DCT2000 was in use, both remotes worked independently.

Comcast Remote Codes

If you have a remote with a Red `OK/Select` button try these steps:Press TVPress and Hold Setup until TV light blinks twiceEnter `991`Press `1`Press PowerPress Channel Up until TV turns offThen press Setup to lock it inGray `OK/Select button:Press TVPress and Hold Setup until TV light blinks twiceEnter `991`Alternate pressing TV and Power unitl TV turns offPress Setup to lock it inGood Luck(m1r6z,http://forums.comcast.com/t5/XfinityTV-and-Equipment/Comcast-DVR-remote-control-code-for-Vizio-47-quot-TV/td-p/1116545). Leader BoardLeading TodayPtsHelpful1.200100%2.200100%3.20084%4.20067%5.20072%6.20073%7.200100%8.20073%9.2008%11.20011%13.2006%15.20069%Leading this WeekPtsHelpful1.40073%2.400100%3.40069%4.40092%5.208100%6.20073%7.20088%8.20078%9.2006%12.2007%14.20018%16.20014%19.20000%Leading this MonthPtsHelpful1.60062%2.60096%3.60098%4.60064%5.60088%6.60097%7.40092%8.40067%9.4008%11.40017%13.4003%15.40016%17.4001%19.40014%21.4007%23.40019%25.40083%.